Air hydraulic jack

  • Air hydraulic jack
  • Model type:50-T3
  • Type:AIR HYDRAULIC JACKS
  • Lifting Capacity:10/25/50T
  • Min Height:151mm
  • Max Height:317mm
  • Working air pressure:0.9-1.2Mpa
  • Air hydraulic jack
Share to

Hydraulic Air Service Jack With CE Approval/80 Ton air hydraulic jack / air lifting jack with competitive price

CONTACT US: 

Whatsapp: +86 15961846820

Email: nicole@wxgoldenboat.com

 

DSC06421_meitu_1.jpg

 

Model type

50-T3

Type

AIR HYDRAULIC JACKS

Lifting Capacity

10/25/50T

Min Height

151mm

Max Height

317mm

Lifting Height

10T:52mm

 25T:54 mm

 50T:60mm

Working air pressure

0.9-1.2Mpa

Net weight

57kg

Gross weight

73kg

Packing size: 

1450*330*280mm

1_meitu_2.jpg

4.jpg50t3.jpg

Lifting:

1.Connect adequate air source to the air supply inlet(Air pressure 0.9-1.2Mpa)

2.Turn the control valve clockwise until the pump starts.

3.Transfer the load immediately to appropriately rated jack stands.

Lowering:

1.Raise load high enough to clear the jack stands.

2.Remove jack stands carefully(always used in pairs).

3.Slowly turn handle knob counter-clockwise, if the load fails to lower:
  (a).Use another jack to raise the vehicle high enough to reinstall jack stands.

  (b).Remove the malfunction jack and then jack stands.

  (c).Use the functioning jack to lower the vehicle.

4.After removing jack from under the vehicle, fully retract the jack to reduce ram exposure to rust and contamination.

 

The detailed compenent parts:

IMG_5871_meitu_1.jpg

 

Packages:

Air hydraulic jack

Air hydraulic jack

 

Air hydraulic jack

MORE RECOMMEND